+ Reply to Thread
Results 1 to 12 of 12

Thread: Lowered my A4 over the weekend

  1. #1
    EA Member xdewaynex has an average reputation xdewaynex's Avatar
    Join Date
    Apr 2010
    Location
    Danville, Ky
    Posts
    45

    Default Lowered my A4 over the weekend

    Damn, what took some people 4hrs, took me 10. I had nothing but hand tools to use, even though I have a compressor, but the hose wasnt long enough lol. Ran into a couple small problems, nothing major or really anything to worry about, but its done. Took some pics and its pretty low to me, but Im sure itll settle a bit more in the next few days. Front right now sits around 23 3/4" ground to fender, and the rear is about 24 to 24 1/4". Enough jabbering, onto the pics...

    Front passenger side. Looks right at home.



    My small pile of tools I used.



    Front driver side done.



    Front passenger done.



    Full frontal done.



    Is this an Audi recall or defect? Rear strut mount rusted out on the backside. Both sides were like this.



    All done.










  2. #2
    Enthusiast wmonty22 has an average reputation wmonty22's Avatar
    Join Date
    Nov 2009
    Location
    New York
    Posts
    324

    Default

    Looks good dropped.

    Audi B6 S4
    BMW 2002Tii
    Whit

  3. #3
    Vernichtungsgedanke sakimano is a true asset to the Euro Addiction community sakimano is a true asset to the Euro Addiction community sakimano is a true asset to the Euro Addiction community sakimano is a true asset to the Euro Addiction community sakimano is a true asset to the Euro Addiction community sakimano is a true asset to the Euro Addiction community sakimano's Avatar
    Join Date
    Nov 2009
    Location
    Oakville, ON
    Posts
    7,773

    Default

    good stuff...looks great. Is that Imola Yellow? Or something else?

    p.s. re: this pic: not sure there's a warranty or recall on anything after 13 years of use!


  4. #4
    EA Member xdewaynex has an average reputation xdewaynex's Avatar
    Join Date
    Apr 2010
    Location
    Danville, Ky
    Posts
    45

    Default

    Thanks. Its actually Brilliant Yellow. Yea, a few users on other boards have said theirs done the same thing.

  5. #5
    Euro Addict Culver is on their way to something great Culver is on their way to something great Culver is on their way to something great Culver's Avatar
    Join Date
    Nov 2009
    Location
    845 NY
    Posts
    1,582

    Default

    Did you do the whole job with a widow maker? That takes balls.
    KlutchOnline.com
    Automotive Clothing

  6. #6
    EA Member xdewaynex has an average reputation xdewaynex's Avatar
    Join Date
    Apr 2010
    Location
    Danville, Ky
    Posts
    45

    Default

    Yea, all the tools pictured are what I used lol. I would have used a floor jack if the seals werent busted.

  7. #7
    Cat In The Hat JEmm has an above average reputation JEmm's Avatar
    Join Date
    Dec 2009
    Location
    07052
    Posts
    580

    Default

    Looks good man! Sounds like a tough job with just hand tools though haha
    -Jeff
    B5 A4 1.8tqm
    chip, low, loud
    Avus's for now...
    N.E.R.D.

  8. #8
    Euro Addict Sandeman is a well respected and helpful member of Euro Addiction Sandeman is a well respected and helpful member of Euro Addiction Sandeman is a well respected and helpful member of Euro Addiction Sandeman is a well respected and helpful member of Euro Addiction Sandeman's Avatar
    Join Date
    Nov 2009
    Location
    Where the headless horseman roams
    Posts
    2,631

    Default

    nice! looks like a sufficient drop!
    Audi with TiTs
    ♥ Wheel Whore
    always Looking for a new set

    --------------------------------------
    The Closer Auto Club
    Dubs & Grub GTG - Westchester County, NY

  9. #9
    North East Region Dubs
    03b6avant is on their way to something great 03b6avant is on their way to something great 03b6avant is on their way to something great 03b6avant's Avatar
    Join Date
    Nov 2009
    Location
    CHESTER, NY
    Posts
    2,190

    Default

    thats low!

  10. #10
    Enthusiast slo s4 has an average reputation slo s4's Avatar
    Join Date
    Nov 2009
    Location
    Houston,TX
    Posts
    207

    Default

    The drop looks good. My corrado was the same color so I have to say I like that too.
    Extensive mod list, including license plate, license plate lights (led), the unappreciated rattling quarter behind ashtray door mod.
    Last but not least the locked AND empty glove-box due to hinges that are about to break (weight saving)
    Races? Of course, I win them all!

  11. #11
    EA Member xdewaynex has an average reputation xdewaynex's Avatar
    Join Date
    Apr 2010
    Location
    Danville, Ky
    Posts
    45

    Default

    Thanks guys. Im loving the drop so far.

  12. #12
    Euro Addict 1redavant has an above average reputation 1redavant's Avatar
    Join Date
    Nov 2009
    Location
    Warwick
    Posts
    1,511

    Default

    slammed bro, looks sick.
    Driving:
    2006 Brilliant Red A4 Avant 2.0TQM
    Revo Stage 2|Carbonio Intake|Stasis SS coils|Podi Gauge|RS6 OEM 18"|H&R spacers|RS4 F/R sways
    custom inlet pipe|Milltek turbo back


    Arnold Palmer Club Member Agent 0

    Contact me for all your decal and graphic needs Infinite Graphics

    Endorsing: -N.E.R.D. -Royal Flush Rallies -EUROaddiction -Arnold Palmer

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts