Single Tip Injectors

[Mike@Ringer-Racing.com]

I now offer a line of custom modified Bosch single tip injectors, all injector sets are flow matched.

60mm body EV14 injectors in 750cc and 1000cc.



60mm EV14 injector in 870cc



48mm Bosch Racing EV1 in 1150cc



I also offer standard Bosch injectors too.
Fuel injector page for VW/Audi

[Joey]

Interesting stuff, Mike!

These are Bosch housings with modified internals?

[Mike@Ringer-Racing.com]

Interesting stuff, Mike!

These are Bosch housings with modified internals?

Bosch housing with a machined single tip.

[03b6avant]

anything smaler than the 850's? running 630's right now with my Revo3 tune

[a4spoolin]

mike is there anyway to get like injector constants for these so I can plug a solid number into Maestro. I'm not sure if they have a EV14 1000cc quick injector listing.

[Mike@Ringer-Racing.com]

anything smaler than the 850's? running 630's right now with my Revo3 tune

Yes I offer 750cc single tip injectors, they too are 60mm O-ring to O-ring.
The 750cc single tip and the 1000cc single tip both look exactly the same since they both are a full 60mm body EV14 injector.

[Mike@Ringer-Racing.com]

mike is there anyway to get like injector constants for these so I can plug a solid number into Maestro. I'm not sure if they have a EV14 1000cc quick injector listing.

Is it the deadtime table you need?

[03b6avant]

Yes I offer 750cc single tip injectors, they too are 60mm O-ring to O-ring.
The 750cc single tip and the 1000cc single tip both look exactly the same since they both are a full 60mm body EV14 injector.

i think the 750 is too big for the Revo3 file though. I run 630's as reconmended by a few BT guys.
If i switch to the UNI file or go custom, i think 750's would be a good match '

[a4spoolin]

go maestro neil

[a4spoolin]

Is it the deadtime table you need?

yea Mike, I'm looking for dead time tables

[Mike@Ringer-Racing.com]

i think the 750 is too big for the Revo3 file though. I run 630's as reconmended by a few BT guys.
If i switch to the UNI file or go custom, i think 750's would be a good match '

Which Revo BT tune are you running? Because I thought the Revo BT tune was for 550cc injectors unless your running the special Eurocode Special with the larger maf and different map sensor.
I know Charlie was running 750cc injectors with his old Eurocode/Revo special tune before he switched to a Eurodyne tune.

[03b6avant]

Which Revo BT tune are you running? Because I thought the Revo BT tune was for 550cc injectors unless your running the special Eurocode Special with the larger maf and different map sensor.
I know Charlie was running 750cc injectors with his old Eurocode/Revo special tune before he switched to a Eurodyne tune.

no not running htat BT file. I guess i'm not COOL enough to run this file. I spoke with, Charlie, Doug, list goes on abou that file. I called to get said file and they acted like i had not clue what i was talking about.
But i do run a 3bar Map sensor, 3"MAF, and 630cc injectors, on the Revo 550cc tune.

[Mike@Ringer-Racing.com]

Now offering a 630cc 60mm EV14 Single tip injector.

[03b6avant]

Now offering a 630cc 60mm EV14 Single tip injector.

whats the difference in those^ compared to these?



Racetronix - L107 - 63 lb/hr Siemens High-Z Fuel Injector MT

[Mike@Ringer-Racing.com]

whats the difference in those^ compared to these?



Racetronix - L107 - 63 lb/hr Siemens High-Z Fuel Injector MT

Bosch vs Siemens and the Bosch EV14 has a much smaller droplet then the Siemens which is why the Bosch EV14's are the best injectors on the market at this time. Even my Bosch 1150cc injectors have a smaller droplet then the Siemens 630cc injector.

I also sell the Siemens 630cc injectors on my web site

[a4spoolin]

bosch ev14 ftw. my idle is sex